Our corn silage testing program compares hybrid yield and quality performance in Pennsylvania grower fields.
Testing regions have been established to provide similarity by geography and crop maturity. Corn silage products within an 8-day maturity range are pooled into a single all-season. All corn silage products entered in a region are seeded at each of 4 test locations within the region. To see our U.S. corn silage testing regions, click
the Map link. Region maps with county and location details can be seen by clicking the region of interest.
Test locations are selected to represent the geographic diversity within silage production areas of a region. Ideal sites have uniform, well-drained soils where farmer hosts use standard production practices for the area.
Seed companies and/or seed distributors are invited to submit their best corn silage products within specified maturity limits to desired test regions. They provide high-quality seed from commercial lots and fees to enter
FIRST tests. The only exceptions are Grower Comparison products (GC after the product name, i.e. x1234 GC), often provided by host farmers for their knowledge as test space permits.
Products are replicated three times minimum per test and grouped in sub-blocks arranged in replication blocks from front to back and side to side. This provides more precision in yield measurement and
flexibility should a disruptive event (i.e. standing water) require elimination
of non-uniform test areas. View products included in tests by clicking the
FIRST managers package, randomize, and plant seeds into host grower fields using slightly modified commercial planting equipment to facilitate mini-strip research. Individual plots (a.k.a. mini-strips) contain four 30"
rows, 45' in length. Soil insecticide is typically applied at planting.
Seeding rate is based on standard area practices.
FIRST field managers measure yield from the center two corn rows using customized commercial self-propelled forage choppers. Forage from each plot is electronically weighed and sampled. Forage samples are frozen then sent to a third party lab for moisture content and forage quality (nutritional value and milk production) analysis. Near infrared reflectance spectroscopy (NIR) is used to measure reported forage quality parameters.
Corn Silage Performance Measurements include:
Yield - corn silage forage plot weight and forage moisture content is used to calculate forage yield in Tons per acre at 70% moisture content.
Stand x 1,000 - final plant population in thousands per acre is determined by counting plants from harvest row portions preharvest.
Dry Matter (%) - the percentage of the freshly chopped forage consisting of dry matter (without moisture). Determined by comparison of fresh sample weight and completely dried sample weight.
Crude Protein (% DM) - the percentage of forage dry matter consisting of crude protein. High values are desired.
Total Starch Content (% DM) - the percentage of forage dry matter consisting of starch. Starch, derived from grain and digestible fiber, is a key energy element.
Digestible Starch Content (% of Tot) - the percentage of total starch that is nutritionally available by digestion after 7 hours, 4 mm.
NEL (Mcal/cwt) - net energy lactation reported as megacalories per 100 pounds of forage dry matter. High values are desired.
NDF (% DM) - neutral detergent fiber measures the fiber content of the forage, expressed as percentage of forage dry matter. Low values are desired.
uNDF (% DM - 240 hr) - undigested neutral detergent fiber content remaining after 240 hours expressed as percentage of forage dry matter. Low values are desired.
Milk per Ton DM (Lbs) - milk production per ton of non-processed forage dry matter is determined using Milk2006 equation (developed by University of Wisconsin). Forage quality measurements for crude protein, NDF, NDFd, starch, ADF, ash and fat are utilized to estimate milk production.
Milk per Ton DM (rank) - milk per ton values are sorted from high to low then numbered consecutively (1, 2, 3...) starting from the highest value. Ties are broken based on higher yield.
Milk per Acre (Lbs) - derived by multiplying silage dry matter yield (Tons@ 70% moisture x 0.3) and milk per ton DM.
Reporting of Results:
FIRST Corn Silage Top 30 Harvest Reports are designed to identify high yielding and high forage quality products at a single location. These reports are generally available at our website within 40 days after harvest.
Corn Silage Top 30 Performance Summary reports identify products that consistently deliver top performance across a region by averaging product results from all 4 test locations. This report is available shortly after the last Harvest Report for a region becomes available on the website.
Results for all products are displayed in both reports. Access current or previous year results by clicking the appropriate "Results" link for the desired year.
Least significant difference (LSD) is provided on all replicated results to facilitate valid product comparisons. Statistically, the LSD value is the minimum difference needed between two products to declare that one product is better than another.
FIRST calculates LSD at the 10% level (p = 0.10). Product yield differences equal or greater than the LSD(0.10) value will be significantly different 9 times out of 10 (90% probability). Typically, low LSD values indicate high quality test results. However, keep in mind that LSD values increase as: test yield level increases, p values decrease [i.e. LSD(0.05) value > LSD(0.10) value > LSD(0.25) value] and as data variability increases. Just because LSD values are higher in some tests vs. others does not mean the results are low quality. Multiple factors have a role in LSD value magnitude.
Coefficient of variability (CV) measures the degree of yield variation within a test. Tests with low CV values (10 or less) have consistent, reliable, high quality results. CV value is not impacted by yield level or p value. It is a true measure of data variability within a test.
Data Rejected - If a data table has "Data Rejected" stamped across it, we have deemed this data is highly variable and of very poor quality, typically due to weather or
other non-genetic factors. Rejection decisions are based on statistical analysis of yield results. Data with very high CV and/or low F-test values are often rejected.
Test Comments - The FIRST manager will provide comments and observations for each test site. This insight on weather patterns, plant health, soil conditions or any other factor may explain unexpected results.
Bold identified means - These product means are significantly better than the test average for that measured parameter.
Grower Comparison (GC) products - These products, identified with a
"GC" product name suffix, are often supplied by growers hosting test sites and included when space permits. Grower comparison products allow direct comparison to products in our tests.